Anycubic Wash And Cure 3 Station

Manufacturer's Website

Description

Introducing the Anycubic Wash And Cure 3 Station. A convenient two-in-one post-processing station designed to simplify the finishing process for resin 3D prints. Instead of requiring separate equipment for washing and UV curing, this compact unit combines both functions into a single workshop-friendly machine. It uses an alcohol-soaking cleaning method to remove uncured resin from finished models before switching to UV curing, making it a practical companion for resin 3D printers and suitable for a wide variety of post-processing workflows. The washing system provides a maximum cleaning volume of 165 x 100 x 180 mm, accommodating a broad range of resin prints. Its dual-layer PP cleaning basket features adjustable heights of 100 mm and 165 mm, allowing it to work with LCD resin printers up to 7.3 inches. The 3-litre cleaning basket capacity helps make efficient use of IPA or other suitable alcohol-based cleaning solutions, while the included 4-litre bucket provides additional capacity for the washing process. This setup helps keep resin cleaning contained and organized rather than requiring separate containers and equipment.

For curing, the Wash & Cure 3 uses ten 405nm UV LEDs to provide consistent UV exposure across the model. A flexible gooseneck light adds targeted curing capability, making it possible to direct additional UV light toward fine details, recessed areas, and harder-to-reach sections of a print. The station offers a maximum curing volume of 3.18 litres, providing enough space to cure larger models in a single session and helping create a more consistent post-processing workflow. Operation is designed to be straightforward, with dedicated touch-button controls for switching between washing, curing, and FlexiCure modes. An infinite rotary knob allows users to set the processing time anywhere from 1 to 30 minutes, providing flexibility for different model sizes and curing requirements. The simple control system means users can quickly select their desired function and adjust the duration without navigating complicated menus or settings.

Compact dimensions make the Anycubic Wash & Cure 3 well suited to home workshops, studios, and dedicated 3D-printing workspaces. Measuring approximately 21.6 x 21.7 x 31 cm and weighing around 2.7 kg, it can sit comfortably on a typical workbench without occupying excessive space. With a rated power consumption of 36W, the station provides a dedicated and efficient solution for routine resin-print post-processing. Overall, the Anycubic Wash & Cure 3 brings washing and UV curing together into a convenient, space-saving system. Its 165 x 100 x 180 mm cleaning capacity, 3.18-litre curing capacity, 10 x 405nm UV LEDs, flexible gooseneck curing light, adjustable 130 minute timer, and 3-litre cleaning basket make it a practical addition to any resin 3D-printing setup. Backed by a 12-month warranty, it offers a straightforward way to clean and cure resin prints with less equipment, less bench space, and a simpler post-processing workflow.

Features

• Dual-mode operation
• Maximum cleaning volume of 165x100x180mm
• Maximum curing volume of 3.18L
• Ten 405nm LEDs plus a flexible gooseneck light
• Dual-layer PP cleaning basket
• 3L cleaning basket capacity
• Adjustable timer from 1 to 30 minutes via infinite rotary knob
• Alcohol soaking cleaning method - no specialist consumables required

Specifications

Package Contents

• 1x Anycubic Wash & Cure 3
• 1x Washing Bucket
• 1x Washing Basket
• 1x Hex Key Set
• 1x Rack Bar
• 1x Gooseneck Light
• 1x Power Adapter
• 1x Curing Table
• 1x Instruction Manual